LF434/LF424,
LF434/LF404
The LF434 is a flange type detector that comes with a variety of
connections built-in various flange connections such as ANSI150, AWWA (24
inch or more), BS 16(or 10), DIN PN 16(or 10), KS flange, JIS10k, JWWA and
others on request. The LF430 can select the combined converter (LF400) and
the separate converter (LF420). The lineup of LF430 are 15mm(1/2 inch),
25mm(1inch), 40mm(1-1/2 inch), 50mm(2 inch), 80mm(3 inch), 100mm(4 inch),
150mm(6 inch), 200mm(8 inch), 250mm(10 inch), 300mm(12 inch), 50mm(14
inch), and 400mm(16 inch).
INDUSTRIAL & POWER SYSTEMS PRODUCTS
Wafer - LF410
Electromagnetic Flowmeters
LF414/LF404, LF413/LF403, LF424/LF420
The LF414 is a wafer type detector, which uses a ceramic tube and is resistant to highly abrasive fluids, extreme temperatures and negative pressure. The coil arrangement in the detector is such that uneven flow can be correctly measured. The multifunctional converters LF404, 403 and 420 use high frequency excitation method and are not easily affected by low frequency noise (slurry noise) and provide excellent superior zero point stability.
The LF150 is a large meter-size detector with small and light-weight structure. Coil arrangement allows for uneven flow to be measured correctly. Combined with the separate LF230, which has an improved noise suppression circuit can provide superior signal processing capabilities. The flowmeter is highly resistant to noise and provides a stable output for fluids containing slurries. The LF150 ranges in size from 500mm(20 inch) to 3000mm(120 inch).
The sanitary flowmeter is designed for food and beverage processing, where equipment must be easy to sanitize, clean and sterilize. The LF494/LF404 is a combined detector-converter and the LF494/LF424 is the model for the detector and the separate converter.
Fractional - LF470
Electromagnetic Flowmeters
The LF470 is a micro fractional detector designed to measure a small amount of fluid containing substance such as chemicals. The wetted materials for the LF470 are corrosion-resistant ceramic and platinum electrodes and are compatible with a wide range of fluids. The LF470 is a lightweight palm-sized detector and can be mounted with a LF420 converter. The lineup of LF470 are 2.5mm (1/10 inch), 4mm (1/6 inch), and 6mm (1/4 inch).
Capacitance (Electrodeless) - LF510
Electromagnetic Flowmeters
The LF510 series employs Toshiba’s advanced capacitance, surface electrode system that is mounted behind the alumina ceramic tube, thus eliminating electrode contact with the process fluid. The unique technology and mechanical design allow this meter to be applied to not only conventional applications, but also new applications such as very low conductivity situations, abrasive and high concentration slurries. This meter provides the opportunity for installation on process fluids where conventional electromagnetic flow meters can not be utilized.
Partially Filled - LF502
Electromagnetic Flowmeters
The LF502 is a magmeter for partially-filled pipes. This magmeter has an improved functional magnetic field distribution technique enabling a high-precision flow measurement from low-level to fully-filled flow conditions. In addition to these characteristics, the LF502 does not allow mud, sands, and other solid sediment to stay at the bottom of the detector pipe and is unaffected by wave or floating solids on the fluid surface. The LF502 also has unique structures such as the positioning of the electrodes, thus eliminating unnecessary piping work such as lifting the downstream pipe section to fill the detector pipe. The lineup of LF502 are 150mm(6 inch), 200mm(8 inch), 250mm(10inch), 300mm(12 inch), 350mm(14 inch), 400mm(16 inch), 500mm(20 inch), and 600mm(24 inch).
ELECTRIX USA, INC.
